<?xml version="1.0" encoding="UTF-8"?>
<LightBurnLibrary DisplayName="Bambu Lab R1 55W">
    <Material name="200g Kraft Paper">
        <Entry Thickness="0.0000" Desc="Cut (Suite: air 30%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="200g Kraft Paper/0.0000/Cut (Suite: air 30%, accel 2100/400)"/>
                <minPower Value="40"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="50"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 50%, accel 15000/1000)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="200g Kraft Paper/0.0000/Line Engrave (Suite: air 50%, accel 15000/1000)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 50%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="200g Kraft Paper/0.0000/Fill Engrave (Suite: air 50%, accel 15000/1000)"/>
                <minPower Value="12"/>
                <maxPower Value="12"/>
                <maxPower2 Value="12"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 50%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="200g Kraft Paper/0.0000/Image Engrave (Suite: air 50%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="30"/>
                <maxPower2 Value="30"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="250g Cardstock - Black">
        <Entry Thickness="0.0000" Desc="Cut (Suite: air 30%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="250g Cardstock - Black/0.0000/Cut (Suite: air 30%, accel 2100/400)"/>
                <minPower Value="40"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="50"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 30%, accel 15000/1000)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="250g Cardstock - Black/0.0000/Line Engrave (Suite: air 30%, accel 15000/1000)"/>
                <minPower Value="30"/>
                <maxPower Value="30"/>
                <maxPower2 Value="30"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 100%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="250g Cardstock - Black/0.0000/Fill Engrave (Suite: air 100%, accel 15000/1000)"/>
                <minPower Value="6"/>
                <maxPower Value="6"/>
                <maxPower2 Value="6"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 50%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="250g Cardstock - Black/0.0000/Image Engrave (Suite: air 50%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="250g Cardstock - White">
        <Entry Thickness="0.0000" Desc="Cut (Suite: air 30%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="250g Cardstock - White/0.0000/Cut (Suite: air 30%, accel 2100/400)"/>
                <minPower Value="40"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="50"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="250g Cardstock - White/0.0000/Line Engrave (Suite: air 20%, accel 15000/1000)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 30%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="250g Cardstock - White/0.0000/Fill Engrave (Suite: air 30%, accel 15000/1000)"/>
                <minPower Value="13"/>
                <maxPower Value="13"/>
                <maxPower2 Value="13"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 50%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="250g Cardstock - White/0.0000/Image Engrave (Suite: air 50%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="30"/>
                <maxPower2 Value="30"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Aluminium Office Card - Black">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Black/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="40"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="70"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Black/0.0000/Fill Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="60"/>
                <maxPower Value="60"/>
                <maxPower2 Value="60"/>
                <speed Value="400"/>
                <interval Value="0.06"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Black/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="400"/>
                <interval Value="0.08"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Aluminium Office Card - Blue">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Blue/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="40"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="70"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Blue/0.0000/Fill Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="150"/>
                <interval Value="0.06"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Blue/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <interval Value="0.08"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Aluminium Office Card - Red">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Red/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="40"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="70"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Red/0.0000/Fill Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="150"/>
                <interval Value="0.06"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Red/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <interval Value="0.08"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Aluminium Office Card - Silver">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Silver/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="40"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="70"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Silver/0.0000/Fill Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="150"/>
                <interval Value="0.06"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Outline (Line) (Suite: air 20%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Silver/0.0000/Fill Outline (Line) (Suite: air 20%)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="70"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Silver/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="0"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Aluminium Office Card - Yellow">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Yellow/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="40"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="70"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Yellow/0.0000/Fill Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="150"/>
                <interval Value="0.06"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium Office Card - Yellow/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="0"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <interval Value="0.08"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Bamboo Board">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Bamboo Board/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="10"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 50%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Bamboo Board/3.0000/Line Engrave (Suite: air 50%, accel 2100/400)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Bamboo Board/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Outline (Line) (Suite: air 50%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Bamboo Board/3.0000/Fill Outline (Line) (Suite: air 50%)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Bamboo Board/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="45"/>
                <maxPower2 Value="45"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Basswood Plywood">
        <Entry Thickness="2.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Basswood Plywood/2.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="75"/>
                <maxPower Value="75"/>
                <maxPower2 Value="75"/>
                <speed Value="30"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="2.0000" Desc="Line Engrave (Suite: air 50%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Basswood Plywood/2.0000/Line Engrave (Suite: air 50%, accel 2100/400)"/>
                <minPower Value="30"/>
                <maxPower Value="30"/>
                <maxPower2 Value="30"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="2.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Basswood Plywood/2.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="460"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="2.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Basswood Plywood/2.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="30"/>
                <maxPower2 Value="30"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Basswood Plywood/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="75"/>
                <maxPower Value="75"/>
                <maxPower2 Value="75"/>
                <speed Value="30"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 50%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Basswood Plywood/3.0000/Line Engrave (Suite: air 50%, accel 2100/400)"/>
                <minPower Value="35"/>
                <maxPower Value="35"/>
                <maxPower2 Value="35"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Basswood Plywood/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="460"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Outline (Line) (Suite: air 20%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Basswood Plywood/3.0000/Fill Outline (Line) (Suite: air 20%)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="460"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Basswood Plywood/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="30"/>
                <maxPower2 Value="30"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Birch Plywood">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Birch Plywood/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="25"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 30%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Birch Plywood/3.0000/Line Engrave (Suite: air 30%, accel 2100/400)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Birch Plywood/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Outline (Line) (Suite: air 50%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Birch Plywood/3.0000/Fill Outline (Line) (Suite: air 50%)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Birch Plywood/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="35"/>
                <maxPower2 Value="35"/>
                <speed Value="300"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Black Stone Slate Coasters">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 50%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Stone Slate Coasters/0.0000/Line Engrave (Suite: air 50%, accel 2100/400)"/>
                <minPower Value="50"/>
                <maxPower Value="50"/>
                <maxPower2 Value="50"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 100%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Stone Slate Coasters/0.0000/Fill Engrave (Suite: air 100%, accel 15000/1000)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 100%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Stone Slate Coasters/0.0000/Image Engrave (Suite: air 100%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Black Walnut Plywood">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Walnut Plywood/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="25"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 30%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Walnut Plywood/3.0000/Line Engrave (Suite: air 30%, accel 2100/400)"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Walnut Plywood/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Walnut Plywood/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="35"/>
                <maxPower2 Value="35"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Clear Glossy Acrylic">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Clear Glossy Acrylic/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="10"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 30%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Clear Glossy Acrylic/3.0000/Line Engrave (Suite: air 30%, accel 2100/400)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Clear Glossy Acrylic/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Clear Glossy Acrylic/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Color Felt Fabric Squares">
        <Entry Thickness="0.0000" Desc="Cut (Suite: air 30%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Color Felt Fabric Squares/0.0000/Cut (Suite: air 30%, accel 300/300)"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="120"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Cork Sheet">
        <Entry Thickness="2.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cork Sheet/2.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="50"/>
                <maxPower Value="50"/>
                <maxPower2 Value="50"/>
                <speed Value="35"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="2.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cork Sheet/2.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="2.0000" Desc="Fill Engrave (Suite: air 50%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cork Sheet/2.0000/Fill Engrave (Suite: air 50%, accel 15000/1000)"/>
                <minPower Value="7"/>
                <maxPower Value="7"/>
                <maxPower2 Value="7"/>
                <speed Value="420"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="2.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Cork Sheet/2.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="13"/>
                <maxPower2 Value="13"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="MDF Board">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF Board/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="8"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 50%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF Board/3.0000/Line Engrave (Suite: air 50%, accel 2100/400)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF Board/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="MDF Board/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Opaque Glossy Acrylic - Black">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Black/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="10"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 30%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Black/3.0000/Line Engrave (Suite: air 30%, accel 2100/400)"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 50%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Black/3.0000/Fill Engrave (Suite: air 50%, accel 15000/1000)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <interval Value="0.08"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Outline (Line) (Suite: air 50%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Black/3.0000/Fill Outline (Line) (Suite: air 50%)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Black/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Opaque Glossy Acrylic - Mistletoe Green">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Mistletoe Green/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="10"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 70%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Mistletoe Green/3.0000/Line Engrave (Suite: air 70%, accel 2100/400)"/>
                <minPower Value="30"/>
                <maxPower Value="30"/>
                <maxPower2 Value="30"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Mistletoe Green/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="400"/>
                <interval Value="0.08"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Outline (Line) (Suite: air 70%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Mistletoe Green/3.0000/Fill Outline (Line) (Suite: air 70%)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Mistletoe Green/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Opaque Glossy Acrylic - Orange">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Orange/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="10"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 50%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Orange/3.0000/Line Engrave (Suite: air 50%, accel 2100/400)"/>
                <minPower Value="35"/>
                <maxPower Value="35"/>
                <maxPower2 Value="35"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Orange/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Outline (Line) (Suite: air 50%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Orange/3.0000/Fill Outline (Line) (Suite: air 50%)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Orange/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="30"/>
                <maxPower2 Value="30"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Opaque Glossy Acrylic - Red">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Red/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="10"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 50%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Red/3.0000/Line Engrave (Suite: air 50%, accel 2100/400)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Red/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Outline (Line) (Suite: air 50%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Red/3.0000/Fill Outline (Line) (Suite: air 50%)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Red/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Opaque Glossy Acrylic - Yellow">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Yellow/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="10"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 50%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Yellow/3.0000/Line Engrave (Suite: air 50%, accel 2100/400)"/>
                <minPower Value="35"/>
                <maxPower Value="35"/>
                <maxPower2 Value="35"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Yellow/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Outline (Line) (Suite: air 50%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Yellow/3.0000/Fill Outline (Line) (Suite: air 50%)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Opaque Glossy Acrylic - Yellow/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="PU Iron-on Patch - Black to Silver">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Iron-on Patch - Black to Silver/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Iron-on Patch - Black to Silver/0.0000/Fill Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Outline (Line) (Suite: air 20%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Iron-on Patch - Black to Silver/0.0000/Fill Outline (Line) (Suite: air 20%)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Iron-on Patch - Black to Silver/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="PU Iron-on Patch - Rustic to Gold">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Iron-on Patch - Rustic to Gold/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Iron-on Patch - Rustic to Gold/0.0000/Fill Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="7"/>
                <maxPower Value="7"/>
                <maxPower2 Value="7"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Outline (Line) (Suite: air 20%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Iron-on Patch - Rustic to Gold/0.0000/Fill Outline (Line) (Suite: air 20%)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Iron-on Patch - Rustic to Gold/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="PU Leather Keychain for Airtags Holder-Black to Gold">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Black to Gold/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Black to Gold/0.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="8"/>
                <maxPower Value="8"/>
                <maxPower2 Value="8"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Black to Gold/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="PU Leather Keychain for Airtags Holder-Blue to Gold">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Blue to Gold/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Blue to Gold/0.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Blue to Gold/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="PU Leather Keychain for Airtags Holder-Carbon fiber Black to Silver">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Carbon fiber Black to Silver/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Carbon fiber Black to Silver/0.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Carbon fiber Black to Silver/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="PU Leather Keychain for Airtags Holder-Carbon fiber Silver to Black">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Carbon fiber Silver to Black/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="30"/>
                <maxPower Value="30"/>
                <maxPower2 Value="30"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Carbon fiber Silver to Black/0.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="15"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Carbon fiber Silver to Black/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="PU Leather Keychain for Airtags Holder-Rustic to Gold">
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 20%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Rustic to Gold/0.0000/Line Engrave (Suite: air 20%, accel 2100/400)"/>
                <minPower Value="25"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Rustic to Gold/0.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 20%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="PU Leather Keychain for Airtags Holder-Rustic to Gold/0.0000/Image Engrave (Suite: air 20%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <interval Value="0.07"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Pebbled PU Leatherette Fabric - Black">
        <Entry Thickness="0.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Black/0.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="50"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 70%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Black/0.0000/Line Engrave (Suite: air 70%, accel 2100/400)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Black/0.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="6"/>
                <maxPower Value="6"/>
                <maxPower2 Value="6"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Outline (Line) (Suite: air 70%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Black/0.0000/Fill Outline (Line) (Suite: air 70%)"/>
                <minPower Value="8"/>
                <maxPower Value="8"/>
                <maxPower2 Value="8"/>
                <speed Value="200"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Black/0.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="7"/>
                <maxPower2 Value="7"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Pebbled PU Leatherette Fabric - Brown">
        <Entry Thickness="0.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Brown/0.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="40"/>
                <maxPower Value="40"/>
                <maxPower2 Value="40"/>
                <speed Value="50"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 40%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Brown/0.0000/Line Engrave (Suite: air 40%, accel 2100/400)"/>
                <minPower Value="13"/>
                <maxPower Value="13"/>
                <maxPower2 Value="13"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Brown/0.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="9"/>
                <maxPower Value="9"/>
                <maxPower2 Value="9"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Outline (Line) (Suite: air 70%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Brown/0.0000/Fill Outline (Line) (Suite: air 70%)"/>
                <minPower Value="8"/>
                <maxPower Value="8"/>
                <maxPower2 Value="8"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Brown/0.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Pebbled PU Leatherette Fabric - Gray">
        <Entry Thickness="0.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Gray/0.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="50"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 40%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Gray/0.0000/Line Engrave (Suite: air 40%, accel 2100/400)"/>
                <minPower Value="13"/>
                <maxPower Value="13"/>
                <maxPower2 Value="13"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Gray/0.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="9"/>
                <maxPower Value="9"/>
                <maxPower2 Value="9"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Outline (Line) (Suite: air 70%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Gray/0.0000/Fill Outline (Line) (Suite: air 70%)"/>
                <minPower Value="8"/>
                <maxPower Value="8"/>
                <maxPower2 Value="8"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - Gray/0.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Pebbled PU Leatherette Fabric - White">
        <Entry Thickness="0.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - White/0.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="50"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Line Engrave (Suite: air 40%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - White/0.0000/Line Engrave (Suite: air 40%, accel 2100/400)"/>
                <minPower Value="13"/>
                <maxPower Value="13"/>
                <maxPower2 Value="13"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - White/0.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="9"/>
                <maxPower Value="9"/>
                <maxPower2 Value="9"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Fill Outline (Line) (Suite: air 70%)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - White/0.0000/Fill Outline (Line) (Suite: air 70%)"/>
                <minPower Value="8"/>
                <maxPower Value="8"/>
                <maxPower2 Value="8"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="0.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Pebbled PU Leatherette Fabric - White/0.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="25"/>
                <maxPower2 Value="25"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Sapele Plywood">
        <Entry Thickness="3.0000" Desc="Cut (Suite: air 100%, accel 300/300)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Sapele Plywood/3.0000/Cut (Suite: air 100%, accel 300/300)"/>
                <minPower Value="80"/>
                <maxPower Value="80"/>
                <maxPower2 Value="80"/>
                <speed Value="25"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Line Engrave (Suite: air 30%, accel 2100/400)">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Sapele Plywood/3.0000/Line Engrave (Suite: air 30%, accel 2100/400)"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="250"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Fill Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Sapele Plywood/3.0000/Fill Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="10"/>
                <maxPower Value="10"/>
                <maxPower2 Value="10"/>
                <speed Value="400"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
            </CutSetting>
        </Entry>
        <Entry Thickness="3.0000" Desc="Image Engrave (Suite: air 70%, accel 15000/1000)">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Sapele Plywood/3.0000/Image Engrave (Suite: air 70%, accel 15000/1000)"/>
                <minPower Value="1"/>
                <maxPower Value="15"/>
                <maxPower2 Value="15"/>
                <speed Value="400"/>
                <interval Value="0.15"/>
                <fgPathAlgorithm Value="CutGantry"/>
                <priority Value="0"/>
                <ditherMode Value="stucki"/>
            </CutSetting>
        </Entry>
    </Material>
</LightBurnLibrary>